Roller Vibrators

Description: A simple design with one moving part delivers high centrifugal forces at high frequency; well suited for fine, dry materials that bridge; also suited for consolidation of precast concrete in steel forms or molds; moderate initial cost; slightly quieter than a ball vibrator; requires lubrication; moderate air consumption; long life.

Recommendation: Intermittent operation (2 to 4 hours/day) when considering energy usage and life.

Models:

• Medium Duty - ideal for small to medium size hoppers.

More Details

• Heavy Duty - well suited for the concrete industry.

More Details

• Extra Heavy Duty - ideal to help place, consolidate, and finish precast concrete; repairable.

More Details

Turbine Vibrators

Description: A turbine wheel rotating on ball bearing(s) delivers high centrifugal force, especially suited for fine, dry materials that bridge stored in small to medium size hoppers.

Recommendation: Intermittent operation (4 to 8 hours/day) when considering energy usage and life.

Models:

• High Pressure, High Frequency - ideal for powder and materials which tend to bridge.

More Details

• Low Pressure, High Amplitude - ideal for materials which contain moisture and tend to bridge or rathole;

More Details

Piston Vibrators

Description: Well suited for small, medium and large hoppers with wet, sticky materials that rathole such as prepared foundry sand; also suited for chutes and feeder applications; low initial cost; high noise levels with impacting models; substantially reduced noise levels with non-impacting models; requires lubrication; low air consumption.

Recommendation: Intermittent operation (4 to 8 hours/day when considering energy usage and life. For continuous duty, use the FP, FPLF, VLB, or VTL/FAL series which are more energy efficient.

Models:

• Precision Linear - especially suitable for feeding parts or powders down chutes or as a pneumatic drive on small vibratory feeders.

More Details

• Extended Piston - for feeding parts and powders down chutes or as a pneumatic drive for vibatory feeders.

More Details

Rotary Air Motor Driven Vibrators

Description: A Powerful vibrator suited for medium to large hoppers with dry or wet, sticky materials that rathole such as prepared foundry sand; also suited for placing and consolidating very low "slump" concrete in steel forms or concrete molds; also suited for portable applications such as a railcar shaker; high noise levels; requires lubrication and clean air, moderate air consumption; repairable.

Recommendation: Intermittent and continuous operations where high force output and/or portability are required or where electrical power is unavailable or undesirable.

More Details

CC7 series with clamp type vibrator for portability.
D7 series, as shown, for permanent mount.

Hydraulic Motor Driven Vibrators

More Details

CC7 series with clamp type vibrator for portability.
D7 series, as shown, for permanent mount.

Rotary Electric Vibrators

Description: A rugged, rotary electric motor with adjustable eccentrics for variable force outputs; well suited for hoppers which store dry or high moisture materials which bridge or rathole; also suited for vibratory feeders and screens and for placing and consolidating very low "slump" concrete in steel or concrete molds or forms; motors are dust tight and suitable for outdoor applications; motors rated for hazardous location are also available; higher initials cost; very low noise levels; very low energy usage; long life; repairable.

Recommendation: Continuous operations when considering energy usage and life.

• 3600 RPM Vibrator - ideal for almost any size hopper, chute, and compaction tables for specific materials which respond to this frequency.

More Details

• 1800 RPM Vibratorideal for bin activators, vibratory screens (product size minus 3/4"), and compaction tables for specific materials which respond to this frequency.

More Details

• 1200 RPM Vibrator - ideal for vibratory screens (product size between 3/4" and 2"), vibratory feeders, and compaction tables for specific materials which respond to this frequency.

More Details

• 900 RPM Vibrator - ideal for vibratory screens (product size greater than 2") and compaction tables for specific materials which respond to this frequency.

More Details

• Light Impact Vibrator - ideal for very small hoppers and chutes.

More Details

• Explosion Proof Vibrator - for hazardous locations.

More Details

• Stainless Steel - for washdown environments.

More Details